|
|
|
National Stock Number:
5310-00-196-6699
Federal Supply Class:
5310
National Item Identification Number:
001966699
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| AN901 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | AN901-5B | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| SPECIAL FEATURES | CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR; HOLE DIAMETER: 0.505 IN. NOM.;MATERIAL: COPPER ALLOY 1100 OVERALL;MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-501 FED SPEC SINGLE MATERIAL RESPONSE OVERALL;PERIPHERAL SHAPE STYLE: ROUND;CENTER HOLE SHAPE STYLE: ROUND;THICKNESS: 0.050 IN. MIN.;OVERALL DIAMETER: RECTANGULAR |
|
|