|
|
|
National Stock Number:
5310-00-196-6676
Federal Supply Class:
5310
National Item Identification Number:
001966676
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 362-601-90104 | 99193 | HONEYWELL INTERNATIONAL INC. | | 5310PL0797928 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 737709PT4 | 56232 | LOCKHEED MARTIN CORPORATION | | AN901 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | AN901-4A | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| SPECIAL FEATURES | CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR;PERIPHERAL SHAPE STYLE: ROUND;CENTER HOLE SHAPE STYLE: ROUND;THICKNESS: 0.0508 IN. NOM.;OVERALL DIAMETER: 0.683 IN. NOM.;HOLE DIAMETER: 0.443 IN. NOM.;MATERIAL: ALUMINUM ALLOY 1100 OVERALL;MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
|
|