|
|
|
National Stock Number:
5310-00-194-3670
Federal Supply Class:
5310
National Item Identification Number:
001943670
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S8157N316-016 | 59364 | HONEYWELL INTERNATIONAL INC. | | S8157N316-016 | 70210 | HONEYWELL INTERNATIONAL INC. | | S8157N316-016 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | OVERALL DIAMETER | 0.240 INCHES MINIMUM AND 0.245 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-5059 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-5059 MIL SPEC 4TH MATERIAL RESPONSE AND QQ-S-764 FED SPEC 5TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 321 OR STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 OR STEEL COMP 303 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIFICATION/STANDARD DATA | 70210-S8157 MANUFACTURERS STANDARD | | THICKNESS | 0.016 INCHES NOMINAL |
|
|