|
|
|
National Stock Number:
5310-00-194-0636
Federal Supply Class:
5310
National Item Identification Number:
001940636
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2411374 | 001JK | EMBRAER S.A. DBA EMBRAER | | 2411374 | S4956 | EMBRAER EMPRESA BRASILEIRA DE AERONAUTICA SA | | 27D118 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. | | 5310001940636 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310001940636 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 5310PL0921608 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 938.75.11.311 | S4080 | PILATUS AIRCRAFT LTD | | AN122583 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. | | AN122583 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | MS9320-11 | 0U583 | SAE INTERNATIONAL | | MS9320-11 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS9320-11 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.333 INCHES MINIMUM AND 0.348 INCHES MAXIMUM | | OVERALL DIAMETER | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD 1ST TREATMENT RESPONSE AND AMS 2416 ASSN STD 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL AND CADMIUM OVERALL | | THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
|
|