|
|
|
National Stock Number:
5310-00-193-9754
Federal Supply Class:
5310
National Item Identification Number:
001939754
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2100-1464631PC37 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 2100-1464632PC8 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 2100-3127769PC73 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 228467PC24 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 24X14 | 62983 | EATON AEROSPACE, LLC | | 3435A10PC88 | 22888 | FMC CORP | | 3435A10PC88 | 80212 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 3435A4PC88 | 22888 | FMC CORP | | 3435A4PC88 | 80212 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 37619 | 00198 | PRATT & WHITNEY CANADA CORP | | 409856PC14SH2 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 409859PC14SH7 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 415-2100-71683PC5 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 415-2100-71686PC5 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 41525PC14SH2 | 62983 | EATON AEROSPACE, LLC | | 41525PC14SH7 | 62983 | EATON AEROSPACE, LLC | | A37619 | 00198 | PRATT & WHITNEY CANADA CORP | | K1-2200-999649PC74 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.375 INCHES MINIMUM AND 0.406 INCHES MAXIMUM | | OVERALL DIAMETER | 0.547 INCHES MINIMUM AND 0.578 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4500 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 101 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM |
|
|