|
|
|
National Stock Number:
5310-00-193-9695
Federal Supply Class:
5310
National Item Identification Number:
001939695
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 145A5 | 56442 | DIAMOND REO TRUCK CO | | 19048 | 64104 | DRESSER, LLC | | 19048 | 79150 | DANA AUTOMOTIVE SYSTEMS GROUP, LLC | | 1AB2135 | 23382 | FWD SEAGRAVE HOLDINGS LP | | 1E5252 | 65282 | WHITE MOTOR CORP | | 91788 | 71995 | DRESSER INDUSTRIES INC WAUKESHA ENGINE DIV | | B2135 | 64104 | DRESSER, LLC | | FF-W-92 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM | | OVERALL DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.031 INCHES NOMINAL |
|
|