|
|
|
National Stock Number:
5310-00-188-4192
Federal Supply Class:
5310
National Item Identification Number:
001884192
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 20145-22 | 15434 | CUMMINS INC. | | 3H4585A308 | 81336 | CHIEF OF ENGINEERS DEPT OF ARMY | | 6426A | 1ML14 | BRINKLEY TECHNOLOGY GROUP LLC | | 6426A | 28265 | HERCULES ENGINE CO INC | | 67507 | 15434 | CUMMINS INC. | | C13797 | 53591 | SCHWITZER ENGINE COMPONENTS A HOUSEHOLD INTL CO |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.524 INCHES MINIMUM AND 1.538 INCHES MAXIMUM | | OVERALL DIAMETER | 2.618 INCHES MINIMUM AND 2.632 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-635 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1040 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.119 INCHES NOMINAL |
|
|