|
|
|
National Stock Number:
5310-00-187-2366
Federal Supply Class:
5310
National Item Identification Number:
001872366
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 41H08 | 30367 | L-TEC WELDING AND CUTTING SYSTEMS | | 41H08 | 36346 | UNION CARBIDE CORP SUB OF DOW CO THE | | 6026-8273-32 | 36378 | RAYTHEON TECHNICAL SERVICES COMPANY | | 6662 | 36378 | RAYTHEON TECHNICAL SERVICES COMPANY | | 940-8 | 80049 | DEPARTMENT OF THE AIR FORCE | | 940-8 | 88041 | AIR CORPS STANDARDS UNDER CUSTODIANISHIP OF THE AIR FORCE | | AN940-8 | 57733 | STEWART-WARNER CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.182 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | OVERALL DIAMETER | 0.500 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | TIN OVERALL | | THICKNESS | 0.049 INCHES NOMINAL |
|
|