5310-00-186-1303, WASHER,FLAT

National Stock Number:
5310-00-186-1303

Federal Supply Class:
5310

National Item Identification Number:
001861303

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

409710PCAN6246-5	06840	BENDIX CORP THE
4824-3113750PCAN6246-5	80064	NAVAL SHIP SYSTEMS COMMAND
4824C3113756PCAN6246-5	80064	NAVAL SHIP SYSTEMS COMMAND
4824D3113740PCAN6246-5	80064	NAVAL SHIP SYSTEMS COMMAND
4824D3113759PCAN6246-5	80064	NAVAL SHIP SYSTEMS COMMAND
4824D3113760PCAN6246-5	80064	NAVAL SHIP SYSTEMS COMMAND
4824H3113741PCAN6246-5	80064	NAVAL SHIP SYSTEMS COMMAND
4824H3113742PCAN6246-5	80064	NAVAL SHIP SYSTEMS COMMAND
4824H3113743PCAN6246-5	80064	NAVAL SHIP SYSTEMS COMMAND
4824H3113744PCAN6246-5	80064	NAVAL SHIP SYSTEMS COMMAND
5310PL1333169	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
547670PCAN6246-5	06840	BENDIX CORP THE
548140PCAN6246-5	06840	BENDIX CORP THE
548150PCAN6246-5	06840	BENDIX CORP THE
548160PCAN6246-5	06840	BENDIX CORP THE
548170PCAN6246-5	06840	BENDIX CORP THE
548190PCAN6246-5	06840	BENDIX CORP THE
549260PCAN6246-5	06840	BENDIX CORP THE
549270PCAN6246-5	06840	BENDIX CORP THE
551350PCAN6246-5	06840	BENDIX CORP THE
AN6246-5	06840	BENDIX CORP THE
AN6246-5	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
AN6246PC5	81350	JOINT ARMY-NAVY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.261 INCHES NOMINAL
OVERALL DIAMETER	0.375 INCHES NOMINAL
MATERIAL	LEATHER OVERALL
PERIPHERAL SHAPE STYLE	ROUND
THICKNESS	0.062 INCHES NOMINAL

Click here to Register for Free 30-day Trial