|
|
|
National Stock Number:
5310-00-185-6541
Federal Supply Class:
5310
National Item Identification Number:
001856541
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 12Z335-214 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | M12554 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | MS19068-132 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | N13ZINCC0ATED | 79568 | WHITTET-HIGGINS COMPANY |
|
Techincal Specification:
| DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | DRIVE POINT DEPTH | 0.125 INCHES NOMINAL | | HARDNESS RATING | 66.0 ROCKWELL B MINIMUM AND 92.0 ROCKWELL B MAXIMUM | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 2.548 INCHES | | NUT DIAMETER | 3.355 INCHES MINIMUM AND 3.385 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TYPE 2 CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD PITCH DIAMETERS | +2.5119 TO 2.5170 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES | UNS |
|
|