|
|
|
National Stock Number:
5310-00-176-6775
Federal Supply Class:
5310
National Item Identification Number:
001766775
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 0532-15 | 94120 | AQUALUNG USA, INC | | 0532-15NM | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
|
Techincal Specification:
| DRIVE POINT QUANTITY | 2 | | DRIVE POINT WIDTH | 0.062 INCHES NOMINAL | | DRIVE POINT DEPTH | 0.094 INCHES NOMINAL | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | MATERIAL | COPPER OVERALL | | NOMINAL THREAD SIZE | 0.190 INCHES | | NUT DIAMETER | 0.562 INCHES NOMINAL | | NUT STYLE | ROUND | | NUT THICKNESS | 0.250 INCHES NOMINAL | | SMALL END DIAMETER | 0.344 INCHES NOMINAL | | SPECIAL FEATURES | MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD,OUTER PERIPHERY HAS V GROOVE OF 60 DEGRE BY 0.01 IN. DEEP | | SURFACE TREATMENT | TIN OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES | UNC | | UNDERCUT THICKNESS | 0.156 INCHES NOMINAL |
|
|