|
|
|
National Stock Number:
5310-00-175-7206
Federal Supply Class:
5310
National Item Identification Number:
001757206
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 02068 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | 63-380 | 97153 | GOODRICH CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.139 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | HEXAGONAL FIRST END | | CROSS-SECTIONAL SHAPE | ROUND SECOND END | | FLANGE THICKNESS | 0.280 INCHES NOMINAL | | FLANGE WIDTH ACROSS FLATS | 3.250 INCHES NOMINAL | | HARDNESS RATING | 29.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION F | | HOLE TYPE AND QUANTITY | 24 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4150 OVERALL | | NOMINAL THREAD SIZE | 2.750 INCHES | | NUT DIAMETER | 3.240 INCHES MINIMUM AND 3.250 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.351 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES | UN |
|
|