|
|
|
National Stock Number:
5310-00-172-6898
Federal Supply Class:
5310
National Item Identification Number:
001726898
Description:
WASHER,SHOULDERED
Detail:
A WASHER, ROUND IN SHAPE, AND HAVING A CENTRALLY LOCATED HOLE. ONE BEARING SURFACE IS FLAT AND UNBROKEN, THE OTHER SURFACE IS IN THE FORM OF A RAISED SHOULDER (BOSS) HAVING A FLAT BEARING SURFACE. THE THICKNESS OF THE SHOULDER (BOSS) MUST NOT EXCEED 25 PERCENT OF THE SHOULDER (BOSS) DIAMETER. FOR ITEMS HAVING A SHOULDER (BOSS) OF GREATER THICKNESS, USE BEARING, SLEEVE; BUSHING SLEEVE; OR SPACER, SLEEVE. EXCLUDES INSULATOR, WASHER AND THRUST TYPE WASHERS.
|
Manufacturer Information:
| 180788-1 | 71791 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| HEAT TREATMENT | F-AS FABRICATED | | HOLE DIAMETER | 0.212 INCHES MINIMUM AND 0.213 INCHES MAXIMUM | | OUTSIDE DIAMETER | 2.610 INCHES MINIMUM AND 2.620 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC 1ST MATERIAL RESPONSE OR WW-T-700/6 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SHOULDER DIAMETER | 2.190 INCHES NOMINAL | | SHOULDER HEIGHT | 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | | STYLE DESIGNATOR | SHOULDERED | | SURFACE TREATMENT | ANODIZE OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|