|
|
|
National Stock Number:
5310-00-150-3855
Federal Supply Class:
5310
National Item Identification Number:
001503855
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| T1H37A | 0ZLV2 | GSE PRODUCTION AND SUPPORT LLC | | T1H37A | 98296 | STANDARD MFG CO INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OR | | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC 1ST MATERIAL RESPONSE OR | | SAE ASSN STD 1ST MATERIAL RESPONSE AND | | QQ-S-624 FED SPEC 2ND MATERIAL RESPONSE OR | | SAE ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.438 INCHES MINIMUM AND | | 0.469 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.234 INCHES MINIMUM AND | | 1.266 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.089 INCHES MINIMUM AND | | 0.099 INCHES MAXIMUM | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 0ZLV2 | | DESIGN CONTROL REFERENCE | T1H37A |
|
|