|
|
|
National Stock Number:
5310-00-150-3792
Federal Supply Class:
5310
National Item Identification Number:
001503792
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 10553927 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 OR | | ALUMINUM ALLOY 6061 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 TEMPER T4 FED SPEC 1ST MATERIAL RESPONSE OR | | QQ-A-225/8 TEMPER T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.255 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.460 INCHES MINIMUM AND | | 0.470 INCHES MAXIMUM | | RECESS DIAMETER | 0.390 INCHES MINIMUM AND | | 0.400 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.100 INCHES MINIMUM AND | | 0.105 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES COUNTERBORE WALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19200 | | DESIGN CONTROL REFERENCE | 10553927 |
|
|