|
|
|
National Stock Number:
5307-00-219-7704
Federal Supply Class:
5307
National Item Identification Number:
002197704
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 25D-11-P03 | 80254 | TEXTRON LYCOMING INC WILLIAMSPORT PLANT |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.090 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | MATERIAL | STEEL | | III COTTER PIN HOLE DIAMETER | 0.076 INCHES NOMINAL FIRST HOLE | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD | | OVERALL LENGTH | 1.380 INCHES NOMINAL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.500 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.780 INCHES MAXIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.2208 TO 0.2221 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|