|
|
|
National Stock Number:
5307-00-217-9647
Federal Supply Class:
5307
National Item Identification Number:
002179647
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 11A9098 | 95201 | NAPCO INTERNATIONAL LLC | | 535886 | 23705 | FRUEHAUF CORP | | 5715 | 72540 | DAYTON-WALTHER CORP |
|
Techincal Specification:
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.812 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.750 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.750 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 5A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.062 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 1.562 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 10 STUD THREAD | | THREAD QUANTITY PER INCH | 10 NUT THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|