|
|
|
National Stock Number:
5307-00-207-6110
Federal Supply Class:
5307
National Item Identification Number:
002076110
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 47-620-229-5 | 04614 | TEXTRON SYSTEMS CORPORATION | | 47-620-229-5 | 80070 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1018 OR | | STEEL COMP 1020 OR | | STEEL COMP 1025 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 1.341 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 20 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.612 INCHES MINIMUM NUT THREAD | | 0.662 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 04614 | | DESIGN CONTROL REFERENCE | 47-620-229-5 |
|
|