| CRITICALITY CODE JUSTIFICATION | CTDT |
| DISTANCE ACROSS FLATS | 0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| OVERALL LENGTH | 1.020 INCHES MINIMUM AND 1.120 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | C50TF25 CL A,FSCM 24446 MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | NICKEL ALLOY |
| NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD |
| NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD |
| NUT END SHANK DIAMETER | 0.190 INCHES NOMINAL |
| NUT END SHANK LENGTH | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.480 INCHES MINIMUM AND 0.485 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| STUD END SHANK DIAMETER | 0.190 INCHES NOMINAL |
| STUD END SHANK LENGTH | 0.135 INCHES NOMINAL |
| STYLE DESIGNATOR | SHOULDERED |
| SURFACE FINISH | 32.0 MICROINCHES SHANK |
| SURFACE FINISH | 63.0 MICROINCHES NUT THD |
| SURFACE FINISH | 63.0 MICROINCHES WRENCHING FACILITY |
| SURFACE FINISH | 63.0 MICROINCHES STUD THD |
| TEST DATA DOCUMENT | 99207-+3TF2 CL A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3A NUT THREAD |
| THREAD CLASS | 3A STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 0.335 INCHES MINIMUM AND 0.355 INCHES MAXIMUM STUD THREAD |
| THREAD LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM NUT THREAD |
| THREAD QUANTITY PER INCH | 32 NUT THREAD |
| THREAD QUANTITY PER INCH | 32 STUD THREAD |
| THREAD SERIES DESIGNATOR | UNJF NUT THREAD |
| THREAD SERIES DESIGNATOR | UNJF STUD THREAD |