|
|
|
National Stock Number:
5307-00-151-9038
Federal Supply Class:
5307
National Item Identification Number:
001519038
Description:
STUD,STEPPED
Detail:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS ON WHICH THE NOMINAL DIAMETER OF ONE THREADED SECTION IS GREATER THAN THE OTHER. THE ENTIRE UNTHREADED PORTION MUST BE OF A SINGLE DIAMETER EQUAL TO OR SMALLER THAN THE MAXIMUM MAJOR DIAMETER OF THE LARGER THREADED END. INCLUDES RADIAL GROOVES OR THREAD RELIEFS. EXCLUDES ITEMS WITH TAPERED THREADS.
|
Manufacturer Information:
| 697094-2 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OR | | STEEL COMP 4340 OR | | STEEL COMP E4340 | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P -416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | STEPPED | | SHANK DIAMETER | 0.221 INCHES MINIMUM AND | | 0.231 INCHES MAXIMUM | | OVERALL LENGTH | 2.834 INCHES MINIMUM AND | | 2.854 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 18 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2840 TO 0.2855 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.615 INCHES MINIMUM AND | | 0.635 INCHES MAXIMUM STUD THREAD | | TEST DATA DOCUMENT | 99167-PN16 04 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 43.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES SHANK | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|