|
|
|
National Stock Number:
5307-00-151-5810
Federal Supply Class:
5307
National Item Identification Number:
001515810
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 127097P4 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 7456 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.396 INCHES MINIMUM AND | | 1.416 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.438 INCHES NUT THREAD | | 0.438 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 14 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3997 TO 0.4012 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.550 INCHES MINIMUM AND | | 0.570 INCHES MAXIMUM NUT THREAD | | 0.730 INCHES MINIMUM AND | | 0.750 INCHES MAXIMUM STUD THREAD | | SPECIAL FEATURES | STUD END THREAD 0.004 IN. OVERSIZE | | HARDNESS RATING | 24.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM |
|
|