|
|
|
National Stock Number:
5307-00-149-5471
Federal Supply Class:
5307
National Item Identification Number:
001495471
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 118803P4 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8735 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 1.740 INCHES MINIMUM AND | | 1.760 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 20 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2250 TO 0.2274 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.428 INCHES MINIMUM NUT THREAD | | 0.615 INCHES MINIMUM STUD THREAD | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.084 INCHES MINIMUM AND | | 0.104 INCHES MAXIMUM FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.073 INCHES MINIMUM AND | | 0.083 INCHES MAXIMUM FIRST HOLE |
|
|