|
|
|
National Stock Number:
5307-00-147-3308
Federal Supply Class:
5307
National Item Identification Number:
001473308
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 1AB2138A | 23382 | FWD SEAGRAVE HOLDINGS LP | | B2138A | 64104 | DRESSER, LLC | | B2138B | 64104 | DRESSER, LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8640H | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 5.688 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.438 INCHES NUT THREAD | | 0.438 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 14 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3940 TO 0.3960 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.062 INCHES MINIMUM NUT THREAD | | 0.625 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | STUD END CHAMFERED 0.062 IN. BY 45.0 DEG,NUT END ROUNDED 0.062 IN. DEEP |
|
|