| DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 5.141 INCHES NOMINAL FIRST HOLE |
| DISTANCE FROM CENTER OF EYE TO SHANK END | 5.685 INCHES NOMINAL |
| EYE INSIDE DIAMETER | 0.191 INCHES NOMINAL |
| EYE OUTSIDE WIDTH | 0.438 INCHES NOMINAL |
| EYE STOCK THICKNESS | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| OVERALL LENGTH | 5.938 INCHES NOMINAL |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE |
| SHANK LENGTH | 5.296 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.4380 INCHES NOMINAL |
| SHOULDER THICKNESS | 0.062 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.390 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNF |