5935-00-201-5622 CONNECTOR,PLUG,ELECTRICAL Index 5306-00-201-5628 BOLT

National Stock Number:
5306-00-201-5625

Federal Supply Class:
5306

National Item Identification Number:
002015625

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.


Manufacturer Information:
11701A06D03059563REID PRODUCTS INC.
68485-6-3056878SPS TECHNOLOGIES, LLC
STSBG001A06D03006710VALLEY-TODECO, INC.
STSBG001A06D03006725SPS TECHNOLOGIES, LLC
STSBG001A06D03017446HUCK INTERNATIONAL, INC
STSBG001A06D03027624SPS TECHNOLOGIES LLC
STSBG001A06D03057928SONIC INDUSTRIES, INC.
STSBG001A06D03092215HOWMET GLOBAL FASTENING SYSTEMS INC
STSBG001A06D03098897LOCKHEED MARTIN CORP


Techincal Specification:
FASTENER LENGTH2.278 INCHES MINIMUM AND 2.325 INCHES MAXIMUM
GRIP DIAMETER0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
HEAD HEIGHT0.210 INCHES NOMINAL
HEAD STYLEDOUBLE HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONSTSBS001 CAGEC 56878 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH156000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.375 INCHES
WIDTH BETWEEN FLATS0.631 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONSTSB9001 CAGEC 5678 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTNICKEL AND CADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial