|
|
|
National Stock Number:
5306-00-194-1655
Federal Supply Class:
5306
National Item Identification Number:
001941655
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| A111-23J | K7766 | BRITISH STANDARDS INSTITUTION |
|
Techincal Specification:
| FASTENER LENGTH | 3.050 INCHES MINIMUM AND 3.090 INCHES MAXIMUM | | GRIP DIAMETER | 0.3743 INCHES MINIMUM AND 0.3748 INCHES MAXIMUM | | GRIP LENGTH | 2.300 INCHES MINIMUM AND 2.413 INCHES MAXIMUM | | HEAD HEIGHT | 0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | A.111,FSCM K7766 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | SPECIAL FEATURES | IDENTIFICATION DISK ON TOP OF HEAD 0.550 IN. DIA,0.030 IN. DEPTH | | WIDTH BETWEEN FLATS | 0.554 INCHES MINIMUM AND 0.562 INCHES MAXIMUM | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.637 INCHES MINIMUM AND 0.790 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|