|
|
|
National Stock Number:
5306-00-151-0323
Federal Supply Class:
5306
National Item Identification Number:
001510323
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| AN174-31 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | AN174H31 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | B6812 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 3.140 INCHES MINIMUM AND | | 3.187 INCHES MAXIMUM | | MATERIAL | STEEL COMP 81B45 OR | | STEEL COMP 4037 OR | | STEEL COMP 4140 OR | | STEEL COMP 4130 OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.140 INCHES MINIMUM AND | | 0.172 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND | | 0.440 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.046 INCHES NOMINAL | | GRIP LENGTH | 2.672 INCHES MINIMUM AND | | 2.704 INCHES MAXIMUM | | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND | | 0.2492 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.984 INCHES MINIMUM AND | | 3.016 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES NOMINAL FIRST HOLE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 88044 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | AN174H31 | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | B6812 |
|
|