5306-00-150-9094, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-00-150-9094

Federal Supply Class:
5306

National Item Identification Number:
001509094

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

AN173H23

88044

AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE

Techincal Specification:

THREAD SERIES DESIGNATOR	UNF
NOMINAL THREAD DIAMETER	0.190 INCHES
THREAD QUANTITY PER INCH	32
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.374 INCHES MINIMUM AND
	0.453 INCHES MAXIMUM
FASTENER LENGTH	2.390 INCHES MINIMUM AND
	2.437 INCHES MAXIMUM
MATERIAL	STEEL COMP 4037 OR
	STEEL COMP 4130 OR
	STEEL COMP 8630 OR
	STEEL COMP 8740 OR
	STEEL COMP 8735 OR
	STEEL COMP 4140 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR
	MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR
	MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR
	MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OR
	MIL-S-6098 MIL SPEC 5TH MATERIAL RESPONSE OR
	MIL-S-5626 MIL SPEC 6TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND
	CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
HARDNESS RATING	26.0 ROCKWELL C MINIMUM AND
	32.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH
HEAD STYLE	HEXAGON
HEAD HEIGHT	0.109 INCHES MINIMUM AND
	0.141 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.365 INCHES MINIMUM AND
	0.377 INCHES MAXIMUM
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE TYPE	DRILLED
HOLE QUANTITY	1
HOLE DIAMETER	0.046 INCHES NOMINAL
GRIP LENGTH	1.984 INCHES MINIMUM AND
	2.016 INCHES MAXIMUM
GRIP DIAMETER	0.1889 INCHES MINIMUM AND
	0.1894 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
	63.0 MICROINCHES GRIP
	250.0 MICROINCHES TOP OF HEAD
	125.0 MICROINCHES THREADS
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.250 INCHES MINIMUM AND
	2.282 INCHES MAXIMUM FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES NOMINAL FIRST HOLE
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	88044
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	AN173H23

Click here to Register for Free 30-day Trial