5306-00-149-9775, BOLT,EXTERNALLY RELIEVED BODY

1560-00-149-9774 FITTING,SPONSON,RIGHT HAND

5306-00-149-9776 BOLT,EXTERNALLY RELIEVED BODY

National Stock Number:
5306-00-149-9775

Federal Supply Class:
5306

National Item Identification Number:
001499775

Description:
BOLT,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.

Manufacturer Information:

2069D20

0AHP5

CURTISS-WRIGHT CONTROLS, INC.

Techincal Specification:

THREAD SERIES DESIGNATOR	UNF
NOMINAL THREAD DIAMETER	0.500 INCHES
THREAD QUANTITY PER INCH	20
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.650 INCHES MINIMUM AND
	0.730 INCHES MAXIMUM
FASTENER LENGTH	1.300 INCHES NOMINAL
MATERIAL	STEEL COMP 8735 OR
	STEEL COMP 4140 OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND
	36.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE	HEXAGON
HEAD HEIGHT	0.260 INCHES NOMINAL
WIDTH BETWEEN FLATS	0.741 INCHES MINIMUM AND
	0.750 INCHES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.160 INCHES NOMINAL ALL HOLES
SHANK UNTHREADED HOLE DIAMETER	0.094 INCHES MINIMUM AND
	0.101 INCHES MAXIMUM ALL HOLES
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	2
FIRST DIAMETER FROM HEAD	0.494 INCHES MINIMUM AND
	0.500 INCHES MAXIMUM
SECOND DIAMETER FROM HEAD	0.434 INCHES MINIMUM AND
	0.438 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.120 INCHES MINIMUM AND
	0.180 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.500 INCHES MINIMUM AND
	0.540 INCHES MAXIMUM
SPECIAL FEATURES	TWO HOLES IN SHANK AT 90 DEG. TO EACH OTHER
THE MANUFACTURERS DATA
MANUFACTURERS CODE	0AHP5
DESIGN CONTROL REFERENCE	2069D20

Click here to Register for Free 30-day Trial