|
|
|
National Stock Number:
5306-00-044-5895
Federal Supply Class:
5306
National Item Identification Number:
000445895
Description:
BOLT,INTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose external threaded portion is of one nominal diameter. It has a concentric hole along the longitudinal centerline which may extend a part or the full length of the bolt. The concentric hole along the centerline may be counterbored and/or internally threaded at the head end or the bolt end. The head is designed to be held or driven by an external and/or internal driver. For items having a hole(s) perpendicular to the axis which meet the concentric hole along the longitudinal centerline, see BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 123AMM11617-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123AMM11617-1 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 79RG9 | | DESIGN CONTROL REFERENCE | 123AMM11617-1 | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.812 INCHES MAXIMUM | | FASTENER LENGTH | 0.812 INCHES NOMINAL | | MATERIAL | STEEL COMP E4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | HARDNESS RATING | 37.0 ROCKWELL B MINIMUM AND | | 40.0 ROCKWELL B MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 165000 POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | CONCENTRIC HOLE UNTHREADED | | CONCENTRIC HOLE DIAMETER | 0.311 INCHES MINIMUM AND | | 0.318 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.250 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 1.250 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 3 | | HOLE DIAMETER | 0.070 INCHES NOMINAL |
|
|