| THREAD SERIES DESIGNATOR | UNJC |
| NOMINAL THREAD DIAMETER | 0.112 INCHES |
| THREAD QUANTITY PER INCH | 40 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.045 INCHES MINIMUM AND |
| 0.125 INCHES MAXIMUM |
| FASTENER LENGTH | 0.095 INCHES MINIMUM AND |
| 0.125 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 302 OR |
| STEEL COMP 304 OR |
| STEEL COMP 305 OR |
| STEEL COMP 316 OR |
| STEEL COMP 384 OR |
| STEEL OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OR |
| 66 FED STD 2ND MATERIAL RESPONSE OR |
| 66 FED STD 3RD MATERIAL RESPONSE OR |
| 66 FED STD 4TH MATERIAL RESPONSE OR |
| 66 FED STD 5TH MATERIAL RESPONSE OR |
| ASTM-A493 AISI XM-7 ASSN STD 6TH MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND |
| 45.0 ROCKWELL C MAXIMUM OVERALL |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| HEAD STYLE | FLAT CHAMFER |
| HEAD DIAMETER | 0.176 INCHES MINIMUM AND |
| 0.183 INCHES MAXIMUM |
| HEAD HEIGHT | 0.108 INCHES MINIMUM AND |
| 0.112 INCHES MAXIMUM |
| INTERNAL DRIVE STYLE | HEXAGON |
| WIDTH ACROSS FLATS | 0.094 INCHES MINIMUM AND |
| 0.095 INCHES MAXIMUM |
| HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| HOLE TYPE | DRILLED |
| HOLE QUANTITY | 2 |
| HOLE DIAMETER | 0.036 INCHES NOMINAL |
| SPECIFICATION/STANDARD DATA | 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |