| FASTENER LENGTH | 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER |
| HEAD DIAMETER | 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| HEAD HEIGHT | 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| HEAD STYLE | ROUND |
| INTERNAL DRIVE STYLE | SLOT |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES PRIMARY WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| PRIMARY WASHER MATERIAL THICKNESS | 0.022 INCHES NOMINAL |
| PRIMARY WASHER OUTSIDE DIAMETER | 0.372 INCHES MINIMUM AND 0.383 INCHES MAXIMUM |
| PRIMARY WASHER STYLE | FLAT INTERNAL TEETH |
| WASHER QUANTITY | 1 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OR ZINC OVERALL |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 1.083 INCHES MINIMUM |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNC |