5305-00-195-9616, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-195-9616

Federal Supply Class:
5305

National Item Identification Number:
001959616

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

109964-1

37695

RAYTHEON COMPANY

Techincal Specification:

THREAD SERIES DESIGNATOR	UNC
NOMINAL THREAD DIAMETER	0.086 INCHES
THREAD QUANTITY PER INCH	56
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.125 INCHES MINIMUM AND
	0.157 INCHES MAXIMUM
FASTENER LENGTH	0.406 INCHES MINIMUM AND
	0.438 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-634 FED SPEC 1ST MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 3RD MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 4TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 5TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 6TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 7TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 8TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 9TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 10TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 11TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 12TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 13TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 14TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 15TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 16TH MATERIAL RESPONSE OR
	QQ-S-634 FED SPEC 17TH MATERIAL RESPONSE OR
	QQ-S-630 FED SPEC 18TH MATERIAL RESPONSE OR
	QQ-S-631 FED SPEC 18TH MATERIAL RESPONSE OR
	QQ-S-637 FED SPEC 18TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-F-14072,FINISH NO. M262 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MINIMUM TENSILE STRENGTH	55000 POUNDS PER SQUARE INCH
HEAD STYLE	PAN NO. 2
HEAD DIAMETER	0.155 INCHES MINIMUM AND
	0.167 INCHES MAXIMUM
HEAD HEIGHT	0.045 INCHES MINIMUM AND
	0.053 INCHES MAXIMUM
INTERNAL DRIVE STYLE	SLOT
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FIRST DIAMETER FROM HEAD	0.058 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.281 INCHES NOMINAL
THE MANUFACTURERS DATA
MANUFACTURERS CODE	37695
DESIGN CONTROL REFERENCE	109964-1

Click here to Register for Free 30-day Trial