5305-00-182-7084, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-182-7084

Federal Supply Class:
5305

National Item Identification Number:
001827084

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

6103SS0440	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
6103SS0440-7	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
6103SS0440-7	1YGB8	CAREY MANUFACTURING CO, INC
902241-01	33827	BAE SYSTEMS INTEGRATED DEFENSE SOLUTIONS INC.
A320T004-102	10241	TELEPHONE SYSTEMS/COMMUNICATIONS

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.349 INCHES MINIMUM AND 0.369 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.547 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM
HEAD DIAMETER	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
HEAD HEIGHT	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 1
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-W-52263 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER	0.112 INCHES
POINT DIAMETER	0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
POINT LENGTH	0.078 INCHES NOMINAL
POINT STYLE	CONE
POINT CHAMFER ANGLE	85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
THREAD QUANTITY PER INCH	40
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial