| FASTENER LENGTH | 0.406 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM FASTENER |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER |
| HEAD DIAMETER | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM |
| HEAD HEIGHT | 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| HEAD STYLE | PAN NO. 2 |
| INTERNAL DRIVE STYLE | SLOT |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE PRIMARY WASHER |
| MATERIAL | STEEL COMP 1022 FASTENER |
| MATERIAL | STEEL COMP 1050 PRIMARY WASHER |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| PRIMARY WASHER MATERIAL THICKNESS | 0.020 INCHES NOMINAL |
| PRIMARY WASHER OUTSIDE DIAMETER | 0.370 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| PRIMARY WASHER STYLE | FLAT EXTERNAL TEETH |
| WASHER QUANTITY | 1 |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.323 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNC |