|
|
|
National Stock Number:
5305-00-153-2782
Federal Supply Class:
5305
National Item Identification Number:
001532782
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 1942754 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.500 INCHES MINIMUM | | FASTENER LENGTH | 1.500 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.230 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.500 INCHES NOMINAL | | INTERNAL DRIVE STYLE | SLOT | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.312 INCHES NOMINAL | | SECOND DIAMETER FROM HEAD | 0.250 INCHES NOMINAL | | THIRD DIAMETER FROM HEAD | 0.312 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.812 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.874 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | 1.000 INCHES NOMINAL |
|
|