|
|
|
National Stock Number:
4820-00-218-7774
Federal Supply Class:
4820
National Item Identification Number:
002187774
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 2130323 | 18355 | THE BOEING COMPANY | | 2130323 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | INTEGRAL | | BONNET TYPE | INSIDE SCREW | | CONNECTION STYLE | PLAIN (PIPE) 2ND END | | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | FLOW CONTROL DEVICE | STEM | | MATERIAL | ALUMINUM ALLOY BODY | | MATERIAL | COPPER ALLOY SEAT | | MATERIAL | STEEL STEM | | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE | | MOUNTING FACILITY | THREADED FASTENER | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END | | RENEWABLE SEAT RING TYPE | PRESSED-IN | | SEAT ANGLE | 30.0 DEGREES 1ST END | | STYLE DESIGNATOR | ANGLE | | THREAD CLASS | 3A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD QUANTITY PER INCH | 18 1ST END | | THREAD SERIES DESIGNATOR | STUB ACME 2ND END | | THREAD SERIES DESIGNATOR | UNS 1ST END | | VALVE OPERATION METHOD | MANUAL |
|
|