|
|
|
National Stock Number:
4820-00-190-9184
Federal Supply Class:
4820
National Item Identification Number:
001909184
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| P10F714T | 97399 | DRAGON VALVES INC |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | BOLTED | | BONNET TYPE | INSIDE SCREW | | CONNECTION STYLE | FLARE(TUBE) 1ST END | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END | | FLOW CONTROL DEVICE | NEEDLE | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 416E/SAE 51416 SE ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE | | MATERIAL | STEEL BODY | | MATERIAL | STEEL COMP 416SE FLOW CONTROL DEVICE | | MATERIAL | STEEL SEAT | | MAXIMUM OPERATING TEMP | 150.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 10000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MOUNTING FACILITY | BULKHEAD | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END | | SPECIAL FEATURES | VALVE SIZE 0.250 IN. | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT | CADMIUM | | THREAD CLASS | 2A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | VALVE OPERATION METHOD | MANUAL |
|
|