|
|
|
National Stock Number:
4820-00-188-8262
Federal Supply Class:
4820
National Item Identification Number:
001888262
Description:
VALVE,STOP-CHECK
Detail:
A VALVE WITH A BOLT OR STEM THAT MAY BE MECHANICALLY ACTUATED TO TWO DIFFERENT POSITIONS BY ROTARY OR LINEAR MOTION. IN THE FIRST POSITION, THE VALVE DISK IS LOCATED AND LOCKED AGAINST THE SEAT PERMITTING NO FLUID FLOW THROUGH THE VALVE. IN THE SECOND POSITION, ONE SIDE OF THE VALVE DISK IS LOCATED AGAINST THE SEAT PERMITTING MOVEMENT OF THE DISK IN A MANNER THAT WILL ALLOW A FLOW OF FLUID IN ONE DIRECTION THROUGH THE VALVE. THE VALVE DISK MAY BE SPRING LOADED. IT MAY BE INLINE OR CARTRIDGE (MANIFOLD) DESIGN. SEE ALSO VALVE (1), LIFT-CHECK AND VALVE (1), STOP-LIFT-CHECK.
|
Manufacturer Information:
| 1022-006H-2.50IN CDS1022006K0001 | 76364 | MILWAUKEE VALVE CO, INC | | 388F6024H | 63686 | THE WALWORTH COMPANY | | 4820PL1341472 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 728287 | 63686 | THE WALWORTH COMPANY | | 803-1385541 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 803-1385541-023 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | CD-54791 | 90664 | WALWORTH CO MARINE DIV | | CD-54791 ITEM 10 | 90664 | WALWORTH CO MARINE DIV | | S4824-1385541 2 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| BOLT CIRCLE NOMINAL DIAMETER | 5.000 INCHES ALL ENDS | | BOLT HOLE NOMINAL DIAMETER | 0.562 INCHES ALL ENDS | | BOLT HOLE QUANTITY | 6 ALL ENDS | | BONNET ATTACHMENT METHOD | BOLTED | | BONNET TYPE | OUTSIDE SCREW-YOKE | | CONNECTION TYPE | FLANGE ALL ENDS | | FACE TO FACE DISTANCE | 9.000 INCHES | | FLANGE FACE DESIGN | PLAIN ALL ENDS | | FLANGE SHAPE | ROUND WITH HOLES ALL ENDS | | FLOW CONTROL DEVICE | DISK | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-390,ALLOY D4 FED SPEC SINGLE MATERIAL RESPONSE BODY | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-288, COMP B FED SPEC SINGLE MATERIAL RESPONSE STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-288,COMP B FED SPEC SINGLE MATERIAL RESPONSE SEAT | | MATERIAL | COPPER ALLOY 922 BODY | | MATERIAL | NICKEL ALLOY FLOW CONTROL DEVICE | | MATERIAL | NICKEL ALLOY SEAT | | MATERIAL | NICKEL ALLOY STEM | | MAXIMUM OPERATING PRESSURE | 100.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 425.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MOUNTING POSITION | HORIZONTAL | | NOMINAL OUTSIDE DIAMETER | 6.125 INCHES ALL ENDS | | NOMINAL THICKNESS | 0.500 INCHES ALL ENDS | | RENEWABLE SEAT RING TYPE | THREADED | | SPECIAL FEATURES | VALVE SIZE 2.500 IN. | | STYLE DESIGNATOR | STRAIGHT THRU FLANGED ENDS | | TEST DATA DOCUMENT | 03950-CID882032969 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 80064-5000-S4824-C1385541 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | VALVE OPERATION METHOD | MANUAL | | VALVE SIZE | 2.500 INCHES |
|
|