|
|
|
National Stock Number:
4820-00-186-3828
Federal Supply Class:
4820
National Item Identification Number:
001863828
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 803-4384536 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 803-4384536-32B | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 803-4384536-32B1AF | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION STYLE | PLAIN (PIPE) ALL ENDS | | CONNECTION TYPE | THREADED EXTERNAL PIPE ALL ENDS | | FEATURES PROVIDED | BONNET PACKING | | FLOW CONTROL DEVICE | DISK | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B164-61 ASSN STD 1ST MATERIAL RESPONSE OR QQ-N-286 FED SPEC 2ND MATERIAL RESPONSE STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-390,ALLOY D4 FED SPEC SINGLE MATERIAL RESPONSE BODY | | MATERIAL | COPPER ALLOY 922 BODY | | MATERIAL | NICKEL ALLOY FLOW CONTROL DEVICE | | MATERIAL | NICKEL ALLOY SEAT | | MATERIAL | NICKEL ALLOY STEM | | MATERIAL | RUBBER PACKING | | MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 150.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL THREAD SIZE | 0.500 INCHES ALL ENDS | | RENEWABLE SEAT RING TYPE | THREADED | | SPECIAL FEATURES | STOP CHECK TYPE | | STYLE DESIGNATOR | STRAIGHT THRU | | TEST DATA DOCUMENT | 03950-CID882037166 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | NPT ALL ENDS | | VALVE OPERATION METHOD | MANUAL |
|
|