|
|
|
National Stock Number:
4820-00-175-9447
Federal Supply Class:
4820
National Item Identification Number:
001759447
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 40303 | 07295 | SPX CORPORATION DBA O T C TOOL & EQUIP DIVISION DIV SPX CORP - KENT-MOORE/OTC DIVISONS DBA USE CAGE CODE 3E2T9 FOR CATALOGING | | HP810 | 07295 | SPX CORPORATION DBA O T C TOOL & EQUIP DIVISION DIV SPX CORP - KENT-MOORE/OTC DIVISONS DBA USE CAGE CODE 3E2T9 FOR CATALOGING |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION STYLE | FLARED (TUBE) 2ND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END | | CONNECTION TYPE | UNTHREADED INTERNAL TUBE 1ST END | | FLOW CONTROL DEVICE | NEEDLE | | MATERIAL | COPPER ALLOY BODY | | MATERIAL | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.625 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.438 INCHES 2ND END | | SEAT ANGLE | 45.0 DEGREES 2ND END | | SPECIAL FEATURES | W/PROTECTIVE CAP,NUT AND RETAINER,ALSO FITS 1/2 AND 9/16 IN. TUBE | | STYLE DESIGNATOR | ANGLE | | THREAD CLASS | 2A 2ND END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD SERIES DESIGNATOR | UNF 2ND END | | VALVE OPERATION METHOD | MANUAL |
|
|