|
|
|
National Stock Number:
4810-00-209-8027
Federal Supply Class:
4810
National Item Identification Number:
002098027
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 280989 | 99657 | MAROTTA CONTROLS INC | | 411-0139-010 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| CONNECTION STYLE | GASKET SEAL(BOSS) 1ST END | | CONNECTION TYPE | THREADED INTERNAL BOSS 1ST END | | CURRENT RATING IN AMPS | 1.200 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN | | FLOW CONTROL DEVICE | POPPET | | MATERIAL | ALUMINUM ALLOY BODY | | MATERIAL | ALUMINUM ALLOY SEAT | | MAXIMUM OPERATING PRESSURE | 50.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 135.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE SINGLE RESPONSE | | MOUNTING POSITION | HORIZONTAL OR VERTICAL | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.000 INCHES 1ST END | | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | SURFACE TREATMENT | ANODIZE | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD QUANTITY PER INCH | 12 1ST END | | THREAD SERIES DESIGNATOR | UN 1ST END | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 22.0 DC AND 29.0 DC |
|
|