|
|
|
National Stock Number:
4730-00-147-2625
Federal Supply Class:
4730
National Item Identification Number:
001472625
Description:
ELBOW,TUBE TO BOSS
Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
|
Manufacturer Information:
| 204-062-618-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | INLET LOCATION | HIGH HEEL SINGLE INLET | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED EXTERNAL BOSS 2ND END | | THREADED INTERNAL BOSS INLET | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | DOUBLE THREADED SECTION W/ GASKET AND LOCKNUT SEALING (BOSS) 2ND END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | 37.0 DEGREES 2ND END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.000 INCHES 1ST END | | THREAD SERIES DESIGNATOR | UN 1ST END | | UN 2ND END | | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END | | 1.312 INCHES 2ND END | | 0.562 INCHES INLET | | THREAD QUANTITY PER INCH | 12 1ST END | | 12 2ND END | | THREAD CLASS | 3A 1ST END | | 3A 2ND END | | 3B INLET | | LEG LENGTH | 1.700 INCHES NOMINAL 2ND END | | FLOW ANGLE | 90.0 DEGREES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 204-062-618-1 |
|
|