| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| HYDROSTATIC TEST PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE |
| OUTSIDE DIAMETER | 0.571 INCHES MINIMUM AND 0.617 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 37.750 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; OPTIONAL PRESSED ON OR REUSABLE TYPE END FITTINGS |
| SPECIFICATION/STANDARD DATA | SAE J517,100R1,TYPE A NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |