|
|
|
National Stock Number:
4720-00-195-2356
Federal Supply Class:
4720
National Item Identification Number:
001952356
Description:
HOSE,AIR DUCT
Detail:
A flexible, tubular item of light wall construction. It must have single or multiple layers of nonmetallic material, but may contain metal wire reinforcement, foil type liner, and/or woven or braided cover. It is designed to convey under low pressure gaseous material, such as air and fumes, and light weight solid materials, such as dust, powders, and fibers. For items with couplings, see HOSE ASSEMBLY, AIR DUCT. For items of sleeve section design rated for high pressure use, see SLEEVE, SEAL, COUPLING. Excludes hose, nonmetallic.
|
Manufacturer Information:
| 65209-03083-102 | 04927 | AUTOMATION INDUSTRIES INC FLEXIBLE TUBING DIV | | 65209-03083-102 | 78286 | SIKORSKY AIRCRAFT CORPORATION | | FT2151-12-24 | 30299 | FLEXIBLE TECHNOLOGIES INC | | IT-103 | 26831 | INDUSTRIAL TUBE CO LLC | | IT-103-12-24 | 26831 | INDUSTRIAL TUBE CO LLC | | SIK1022-0102 | 16632 | FLEXFAB LLC |
|
Techincal Specification:
| END INSIDE DIAMETER | 1.500 INCHES NOMINAL BOTH ENDS | | CONNECTION TYPE | SOFT BOTH ENDS | | CONNECTION STYLE | ROUND BOTH ENDS | | CROSS-SECTIONAL SHAPE STYLE | ROUND | | END OVERALL LENGTH | 3.000 INCHES NOMINAL BOTH ENDS | | INSIDE DIAMETER | 3.000 INCHES NOMINAL FIRST END | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-H-6855,CLASS 2,GRADE 60 MIL SPEC ALL MATERIAL RESPONSES 1ST PLY | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-H-6855,CLASS 2,GRADE 60 MIL SPEC ALL MATERIAL RESPONSES 3RD PLY | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-H-6855,CLASS 2,GRADE 60 MIL SPEC ALL MATERIAL RESPONSES 4TH PLY | | MATERIAL | FIBERGLASS AND RUBBER CHLOROPRENE CLASS CR 1ST PLY | | MATERIAL | FIBERGLASS AND RUBBER CHLOROPRENE CLASS CR 3RD PLY | | MATERIAL | FIBERGLASS AND RUBBER CHLOROPRENE CLASS CR 4TH PLY | | MATERIAL | PLASTIC POLYAMIDE 2ND PLY | | MAXIMUM OPERATING PRESSURE | 5.0 POUNDS PER SQUARE INCH | | MEASURING METHOD AND LENGTH | 12.000 INCHES NOMINAL OVERALL | | MINIMUM INSIDE BENDING RADIUS | 1.500 INCHES | | STYLE DESIGNATOR | HELICALLY WOUND CONTINOUS WIRE SUPPORTED |
|
|