|
|
|
National Stock Number:
4330-00-191-3092
Federal Supply Class:
4330
National Item Identification Number:
001913092
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1744580-01 | 90005 | PUROLATOR FACET INC. | | 2528040 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | AC2634E129X1 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| DROP PRESSURE | 4.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.781 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.197 INCHES NOMINAL | | BODY OVERALL LENGTH | 12.570 INCHES MINIMUM AND 12.670 INCHES MAXIMUM | | DESIGN TYPE | LIMITED | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 45.0 ABSOLUTE AND 17.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | STEEL FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
|
|