| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | MS33649-6 AND MS33649-3 |
| CONNECTION QUANTITY | 3 |
| CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| DISPLACEMENT TYPE | VARIABLE |
| FSC APPLICATION DATA | MOUNT MACHINE GUN |
| MATERIAL | STEEL HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000PSI AT MINUS 65 DEG F TO PLUS 250 DEG F |
| MOUNTING BOLT HOLE SPACING | 1.876 IN. BY 1.876 IN. |
| MOUNTING HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | PAD |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 6960.0 |
| PITCH DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UN |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPLINE PITCH | 32/64 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 12 |
| SPLINE LENGTH | 0.880 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.406 INCHES MINIMUM AND 0.423 INCHES MAXIMUM |
| SPLINE MINOR DIAMETER | 0.351 INCHES MINIMUM AND 0.353 INCHES MAXIMUM |
| SURFACE TREATMENT | ENAMEL HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.563-18 AND 0.375-24 |
| TORQUE LOAD RATING | 57.3 INCH-POUNDS |