Techincal Specification:
| ELECTRIC MOTOR HORSEPOWER RATING | 0.75 | | ELECTRIC MOTOR QUANTITY | 1 | | ACCESSORY COMPONENTS AND QUANTITY | 2 BELT,FLAT,V-DR.;1 BENCH-LATHE;1BIT,LATHE TOOL HOLDER,HIGH SPEED STEEL,BORING,3/16BY3/16IN.TURNING 1/4BY1/4IN.;2 BLADE LATHE TOOL HOLDER,CUT OFF,HIGH SPEED STEEL,3/32BY5/8 IN.;2 CTR.,LATHE,PIPE,1/2BY 3 IN.;2 CTR.,LATHE,60 DEG.NO.2 MORSE TAPER;2 CHUCK,DRILL,3 JAW,0 TO 1/2 IN.;2 CHUCK,LATHE,FITTED,IND.,4 JAW,REV.,8 IN.,UNIV.,3 JAW,W/2 SETS JAWS,1 SET INTERNAL,1 SET EXT.,6 IN.;2 COLLET,SPLIT,F/ROUND WORK,1/16,1/8,3/16,1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4,7/8,1 IN.;2 COLLET ATTACHMENT,H/WHEEL TYPE,1/16 TO 1 IN.;2 CUTTING ATTACHMENT,MILLING AND KEYWAY;2 LATHE,BENT TAIL,SINGLE SCREW,SINGLE,3/8,3/4,1-1/4,1-1/2,2-1/2 IN.;2 FACE PLATE,5-5/8,8-3/8 IN.;2 SET GEARS,METRIC TRANSPOSING,ENG.GRAD.;2 HOLDER,LATHE TOOL,TURNING,STRAIGHT,3/8 BY 7/8 IN.SHANK FOR 1/4 BY 1/4 IN.BIT,BORING,3/8 BY 7/8 IN.SHANK,COMP.W/9/16 IN.BAR AND 30,45,90 DEG.END CAPS FOR 3/16 IN.BITS,CUTTING OFF,RH,3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE | | ACTUAL SWING OVER BED | 10.125 INCHES NOMINAL | | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER | | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER | | CARRIAGE QUANTITY | 1 | | CENTER TO CENTER DISTANCE | 33.750 INCHES NOMINAL | | CURRENT TYPE | AC | | DESIGN TYPE | SCREW | | FREQUENCY IN HERTZ | 60.0 | | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED | | HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL | | MOUNTING TYPE | BENCH | | SPECIAL FEATURES | 2 HOLDER,LATHE TOOL,CUTTING OFF,STRAIGHT 3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE,TURNING,OFFSET,LH,3/8 BY 7/8 IN.SHANK,F/1/4 BY 1/4 IN.BIT;2 INDIC.,THREAD DIAL;2 KNURLING TOOL,REVOLVING HEAD,3/8 BY 7/8 BY 5-1/2 IN.SHANK,W/3 PR KNURLS DIAMOND SHAPE,FINE,MED.,COARSE 2 POST,TOOL,TO ACCOMMODATE 3/8 BY 7/8 IN.SHANK;2 REST,CPD.GRAD.,FOLLOWER,STEADY;2 SLEEVE,LATHE,H/STOCK SPINDLE;2 STOP,CARRIAGE,MICROMETER,THREAD CUTTING,ADJUSTABLE;2 SWITCH,208V,3 POS.START,STOP,REV.;2 TAPER ATTACHMENT,TELESCOPIC,LATHE | | PERFORMANCE TYPE | STANDARD DUTY | | PHASE | THREE | | PURPOSE FOR WHICH DESIGNED | GENERAL | | RATED SWING | 10.000 INCHES NOMINAL | | SPINDLE SPEED QUANTITY | 12 | | SPINDLE SPEED RANGE IN RPM | +55.0 TO 1400.0 | | SWING OVER CROSS SLIDE | 5.750 INCHES NOMINAL | | THREAD CHANGE QUANTITY | 48 | | THREAD QUANTITY RANGE | +4.0 TO 80.0 PER INCH | | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
|