| MATERIAL | STEEL COMP E52100 INNER MEMBER |
| STEEL COMP 410 RACE INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 MIL SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE RACE INSERT |
| HARDNESS RATING | 60.0 ROCKWELL C MINIMUM AND |
| 63.0 ROCKWELL C MAXIMUM INNER MEMBER |
| 38.0 ROCKWELL C MINIMUM AND |
| 36.0 ROCKWELL C MAXIMUM ROD END BODY |
| SURFACE TREATMENT | CHROMIUM INNER MEMBER |
| CADMIUM ROD END BODY |
| STYLE DESIGNATOR | BALL TYPE |
| OVERALL LENGTH | 2.1050 INCHES MINIMUM AND |
| 2.1350 INCHES MAXIMUM |
| BORE DIAMETER | 0.3745 INCHES MINIMUM AND |
| 0.3750 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.9800 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 1.6150 INCHES MINIMUM AND |
| 1.6350 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.4010 INCHES MINIMUM AND |
| 0.4110 INCHES MAXIMUM |
| INNER MEMBER WIDTH | 0.4950 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| STATIC RADIAL LOAD RATING | 10380 POUNDS |
| SHANK STYLE | INTERNALLY THREADED W/BEAD AND WRENCH FLATS AND INSPECTION HOLE |
| SHANK THREAD LENGTH | 0.9062 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.4690 INCHES NOMINAL |
| SHANK WIDTH ACROSS WRENCH FLATS | 0.5625 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD DIAMETER | 0.375 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |