|
|
|
National Stock Number:
3120-00-046-4041
Federal Supply Class:
3120
National Item Identification Number:
000464041
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 65363-07009-101 | 78286 | SIKORSKY AIRCRAFT CORPORATION | | 65363-07009-101 | D1081 | AIRBUS DEUTSCHLAND GMBH -WERK BREMEN- |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 3.4900 INCHES NOMINAL | | OUTSIDE DIAMETER | 5.0000 INCHES NOMINAL | | OVERALL THICKNESS | 0.0430 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY AND PLASTIC AND LEAD ALLOY INTERMEDIATE LAYER | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER | | MATERIAL | STEEL OUTER LAYER | | WIDTH ACROSS FLATS | 4.7500 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND W/TWO FLATS | | SURFACE FINISH | 90.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY | | SURFACE FINISH | 90.0 MICROINCHES RIGHT SIDE | | SURFACE FINISH | 90.0 MICROINCHES LARGEST OUTSIDE DIAMETER | | SURFACE FINISH | 90.0 MICROINCHES LEFT SIDE |
|
|